大乐透怎么玩

Hello, welcome to Luoyang TST Flaw Detection Technology Co., Ltd.
Recommended products
Contact us
  • Luoyang TST Flaw Detection Technology Co., Ltd.
  • Address: 4 level 3, No. 22 Binhe Road, Luoyang hi tech Zone.
  • Contact: manager Guo
  • Tel: 0379-60691666
  • Mailbox: [email protected]

Wire rope flaw detector for military use

[time: 2020-06-04]
Details

 Wire rope flaw detector for military use  


Product functional advantages:

1. quantitative qualitative detection:

Quantitative location detection  

According to the pattern recognition software, the damage types such as fatigue, rust, wear and broken wires inside and outside the steel strip can be identified.



2. flaw detection

Electromagnetic induction signal to noise ratio: S/N > 85dB

3. wide distance flaw detection

  Signal extraction distance 30mm Above



4. high speed flaw detection

  Detection speed 30m/s



5. intelligent flaw detection

  Intelligent automatic quantitative discrimination, classification and statistics of various internal and external injuries, accurately assess the safety status of wire ropes.

6. big data cloud platforms

At the same time, it integrates data analysis technology such as Internet of things, big data, cloud computing and so on, so that the security monitoring information can be expanded from local to regional scale, and distributed end information will be integrated into the whole security information database, so as to achieve safety management without boundaries.

System parameters:    

Electromagnetic induction signal to noise ratio: S/N > 85dB

The quantitative uncertainty of flaw detection is less than or equal to 0. One point two %

The signal has a distance of extraction. Zero ~ 30mm

Real time response time of flaw detection: less than 0.5ms

Sustainable detection distance: >10km

Sensor dissipation power: System

Reliability check cycle: >27 million hours

Voltage and current:

A) rated working voltage: System

B) voltage fluctuation range: System

C) working current: System

Signal system:

A) the number of output signals: Six road

B) output signal voltage range: ( Zero ~ Five ) VDC

C) working sensitivity: greater than or equal to 1.0V/mT

Flaw detection capability:

I probabilities of injury > 83% (I damage: stress cross section loss ratio < 2.5% Injury)

Second, damage detection probability > 91% (II) injury: 2.5% Less than the stress section loss rate < 5% Injury)

Third, the probability of injury detection. 99% (III) injury: 5% Less than the stress section loss rate < 9.5% Injury)

Probability of exceeding limit damage probabilities: 100% (super damage: stress cross section loss ratio > 9.5% )

Applicable environment:

A) use ambient temperature: System

B) using relative humidity: Making

C) storage temperature environment: System


 


Contact information
  • Luoyang TST Flaw Detection Technology Co., Ltd.
  • Contact: manager Guo
  • Telegram: 0379-60691666
  • Mailbox: [email protected]
  • Site: 4 level 3, No. 22 Binhe Road, Luoyang hi tech Zone.
Online Message
  • *
  • *
  • *
567彩票 下载 北斗棋牌全部版本 S中彩票妙招 中彩网投注为什么不花钱 3d开奖结果开好今天晚上 下载星云娱乐斗地主 乐彩3d论坛手机17500 乐彩网17500双色球出球顺序 3d172前后关系 中国福体育票开奖结果