大乐透怎么玩

Hello, welcome to Luoyang TST Flaw Detection Technology Co., Ltd.

Export-oriented single rope and double rope following wire rope automatic flaw detection system

[time: 2020-06-03]
Details


TST wire rope flaw detection (Engineering) system V3.0 Used for single / The design of double rope drum winding hoist steel wire on-line real-time automatic flaw detection can adapt to different lifting forms to adjust and install flexibly. It belongs to the omnipotent flaw detection engineering automation device. The integration of three dimensional magnetic induction bridge and self balancing synchronous excitation technology has been applied all day.   Waiting for automatic monitoring mode is conducive to comprehensive and timely understanding of the use of wire rope in operation and ensuring production safety.


Name

Product model

Structural specification

Detection of rope diameter range

Number of wire ropes

TST Wire rope flaw detection (Engineering) system V3.0

KJ578

TS-G2101C/

TS-G2201C

16~56mm

Single rope winding

TS-G2102C/

TS-G2202C

16~56mm

Double barrel winding

Product application site:

 

 


Product functional advantages:

1. quantitative qualitative detection:

Quantitative location detection  

According to the pattern recognition software, the damage types such as fatigue, rust, wear and broken wires inside and outside the steel strip can be identified.


2. flaw detection

Electromagnetic induction signal to noise ratio: S/N > 85dB

3. wide distance flaw detection

  Signal extraction distance 30mm Above

4. high speed flaw detection

  Detection speed 30m/s


5. intelligent flaw detection

  Intelligent automatic quantitative discrimination, classification and statistics of various internal and external injuries, accurately assess the safety status of wire ropes.

6. big data cloud platforms

At the same time, it integrates data analysis technology such as Internet of things, big data and cloud computing, so as to expand the security monitoring information from local to regional scale, and integrate distributed end information into the overall safety information database, so as to achieve safety management without boundaries.


Specification parameter

System parameters:  

Electromagnetic induction signal to noise ratio: S/N > 85dB

Quantitative uncertainty of flaw detection: Less than or equal to 1.2 %

The signal has a distance of extraction. Zero ~ 30mm

Real time response time of flaw detection: Less than 0.5ms

Sustainable detection distance: >10km

Sensor dissipation power: <50mW

Reliability check cycle: >27 Ten thousand hours

Voltage and current:

A Rated working voltage: 5VDC

B Voltage fluctuation range: ( Four point seven five ~ Five point two five ) VDC

C Working current: Less than 200mA

  signal system

A Output signal: Six road

B Output signal voltage range: ( Zero ~ Five ) VDC

C) Working sensitivity: more or less. 1.0V/mT

Flaw detection capability:

I Probability of damage detection 83% ( I Damage: loss of stress cross section < 2.5% Injury)

II Probability of damage detection 91% ( II Injury: 2.5% or less Loss of stress cross section < 5% Injury)

III Probability of damage detection 99% ( III Injury: 5% or less Loss of stress cross section < 9.5% Injury)

Probability of exceeding limit damage probabilities: 100% (super damage: stress cross section loss rate) More than 9.5% )

Applicable environment:

A) Ambient temperature: -20 C ~ +55 C

B) Using relative humidity: Less than 95%RH ( 25 C )

C) Storage temperature environment: -40 C ~ +60 C Relative humidity Less than 95%


System topology:


System functions:

The data acquisition device and other ancillary facilities are conveniently installed at appropriate locations on the working site.

Wide range detection and high speed detection.

Through quantitative nondestructive detection and remote network communication, the combination of on-line monitoring technology and daily equipment management is realized.

Twenty-four The online monitoring of concealed damage of wire rope internal and external broken wires, wear, rust and fatigue can be realized by uninterrupted operation, remote monitoring and real-time warning. It can also detect data and various quantitative quantities of damage, and make safety evaluation and print report.

The use of software can run independently and achieve the integration and compatibility of other control operating systems.

It has mechanical anti vibration and anti electromagnetic interference function.

It realizes the sound and light alarm of damage scene and realizes the real-time alarm function of SMS.

It has waterproof, dustproof, oil resistant and moistureproof functions.

Provide software maintenance and continuous service.


Test report:


 

 

Contact information
  • Luoyang TST Flaw Detection Technology Co., Ltd.
  • Contact: manager Guo
  • Telegram: 0379-60691666
  • Mailbox: [email protected]
  • Site: 4 level 3, No. 22 Binhe Road, Luoyang hi tech Zone.
Online Message
  • *
  • *
  • *
567彩票 下载 北斗棋牌全部版本 S中彩票妙招 中彩网投注为什么不花钱 3d开奖结果开好今天晚上 下载星云娱乐斗地主 乐彩3d论坛手机17500 乐彩网17500双色球出球顺序 3d172前后关系 中国福体育票开奖结果